Rear-Facing Installation Lap-Shoulder Belt Installation
1. Open the CLICKTIGHT
a) Press the dimple on the CLICKTIGHT dial.
b) Rotate dial clockwise until CLICKTIGHT releases and lift to open.

2. Recline the unoccupied child seat and place rear facing on the vehicle seat.

3. Slide both parts of the vehicle belt into the rear facing belt slots.

4. Ensure the vehicle belt is not twisted and buckle the seat belt.

5. Remove slack from the lap part (a), then the shoulder part (b) of the vehicle belt.

6. Close the CLICKTIGHT.
A click confirms the CLICKTIGHT is secure.

Forward-Facing Installation Lap-Shoulder Belt Installation
1. Remove the tether from the tether storage compartment and retainer tabs and place it up and over the child seat back.

2. Recline the unoccupied child seat and place forward-facing on the vehicle seat. Ensure that the base of the child seat is flat on the vehicle seat and no more than 3 in. (7.6 cm) of the base hangs over the edge of the vehicle seat.

3. Open the CLICKTIGHT.
a). Press the dimple on the CLICKTIGHT dial.
b). Rotate dial clockwise until CLICKTIGHT releases and lift too pen.

4. Slide both parts of the vehicle belt into the forward-facing belt slots.

5. Ensure the vehicle belt is not twisted and buckle the seat belt.

6. Remove slack from the lap part (a), then the shoulder part (b) of the vehicle belt.

7. Close the CLICKTIGHT.
A click confirms the CLICKTIGHT is secure.

8. Attach the tether to a designated anchor (see vehicle owner's manual) and remove slack.